|
| |
EPOXY POOL COATINGS
Epoxy pool coatings have proven to be the most effective long-range protection
for swimming pool surfaces. This is due to the fact that epoxies cure to a very
hard, non-porous finish that is insensitive to pool chemicals, pH balance and
automatic pool cleaning machines. Their "ceramic-like" qualities create a fresh
and inviting appearance that will be easy to clean and extremely durable. We use
two types of epoxy pool coatings. The following product descriptions will enable
you to decide which system is right for you.
 | The Zeron System
 | High Gloss Finish |
| Alternative to Plaster |
| Longest Lasting |
|
The ZERON system is the longest lasting epoxy pool coating available. You can
expect up to eight years of service from one application of this product.
ZERON is a heavier bodied material than POXOLON so it will require a little more
effort in its application and will not spread as far. However, due to the
extremely long life of ZERON, the cost per year of service is lower than any
other pool coating available. We prefer to apply one thin coat first then
a second, full strength coating. This helps to seal any cracks and loose
spots remaining on the surface.
This coating may be applied by roller or airless spray equipment. ZERON is
highly recommended for professional pool builders and pool service companies as
an alternative to traditional pool plaster. The finished surface will stay
brighter and will be easier to keep clean than a plastered pool.
Coverage: Approximately 125 - 150 square feet per gallon.
Available in these attractive colors: White, Blue Ice, Bikini Blue and Blue
Mist.
| The Poxolon System
| Tile-Like Finish |
| Low Maintenance |
| Years of Life |
|
 POXOLON
is a high gloss epoxy pool coating that is easy to apply and should yield up to
five years of service. This finish is very easy to clean as is the case with all
epoxy pool coatings. You may use POXOLON on most conventional pool surfaces with
excellent results. Uncoated pool surfaces will require a prime coat to insure
good adhesion. Recommended for use by pool service companies and the do it
yourself pool owner. Use with primer on concrete, plaster, fiberglass and metal
pools. Two finish coats of POXOLON are required in all cases. POXOLON may be
applied by either airless sprayer or roller.
Coverage: Approximately 225 - 250 square feet per gallon.
Available in these attractive colors: White, Blue Ice, Blue Mist, Bikini Blue,
Viking Blue, Spanish Blue, Sunshine Yellow, Red Pepper, Black, and Clear.
|
